ADL Removalists
Adelaide removals

Pool Table Removals in Adelaide

A slate pool table must be dismantled, moved and re-levelled or it will never play true again, so we connect you with Adelaide specialists who do all 3, not just lift and shift.

  • Vetted local crews
  • Fully insured moves
  • Transparent quotes
  • No obligation

Pool table removals in Adelaide run around $300 to $700 for a dismantle, move and re-level, because a slate table cannot simply be carried like furniture. The slate bed is heavy, brittle and must be unbolted, the felt protected, and the table precisely re-levelled at the new address or it plays crooked. We match you with vetted specialists who handle all 3 stages, not a general crew who will only move it.

  • A dismantle, move and re-level runs around $300 to $700 in Adelaide.
  • Slate is heavy and brittle: it must be unbolted and carried, never dragged.
  • The felt is easily torn or stained, so it is protected or replaced with care.
  • Re-levelling at the new home is essential or the table will play crooked.

Why a pool table is a 3-stage job

A quality pool table is built around one or more slate beds, and slate is the reason it cannot be moved like an ordinary table. A full-size slate bed can weigh 200 to 400 kg across 3 pieces, it is brittle enough to crack if it is flexed or dropped, and it is bolted and often bedded onto the frame with wax or shims. You cannot tip a slate table on its side and carry it out the way you would a dining table without risking a cracked bed and a ruined table.

That is why a proper pool table move is 3 distinct stages, not one lift. The table is dismantled at the old address, the components are transported protected and in order, and the table is rebuilt and precisely re-levelled at the new one. Skip any stage, or hand it to a crew that only knows how to carry furniture, and you end up with a table that either arrives damaged or never plays true again.

We do not move the table ourselves. We connect you with Adelaide crews that specialise in pool tables and do all 3 stages, so the people quoting your job actually dismantle, transport and re-level rather than treating a slate bed as heavy furniture.

Dismantle, slate care and the felt

The dismantle sets up everything that follows. The specialist removes the pockets and rails, then lifts off the felt-covered slate beds, which on a 3-piece table come apart into manageable sections and on a 1-piece table become a genuine multi-person lift. The slate is never dragged: it is unbolted, lifted clear and carried flat, because flexing or edge-loading it is exactly how a bed cracks.

The felt (properly the cloth) needs its own care. On a stapled cloth the crew works to preserve it where the table is being reassembled soon, but on many moves the cloth is removed and replaced at the new address because it stretches and marks once disturbed, and a re-stretch or re-cloth is what gives a true playing surface afterwards. Ask each crew whether re-clothing is included or quoted separately so you are comparing like for like.

The slate itself is transported flat and cushioned, never stood on its edge in the truck, and the frame, legs and rails are padded and kept together so nothing is missing at reassembly. Handled this way, the components arrive ready to be rebuilt into a table that plays as well as it did before.

  • Pockets and rails removed first, then the slate beds lifted clear.
  • Slate carried flat and cushioned, never dragged or stood on edge.
  • Cloth preserved where possible, or re-stretched and re-clothed for a true surface.
  • Frame, legs and rails padded and kept together for a clean rebuild.

Re-levelling is what makes it play true

Re-levelling is the stage that separates a specialist from a removalist, and it is the one people underestimate. Once the frame and slate are reassembled at the new address, the beds have to be brought perfectly flat to each other and to level, because even a millimetre of fall will send balls drifting and ruin the game. On a multi-piece slate, the seams between the sections also have to be filled and made smooth so there is no lip for a ball to catch on.

The specialist uses a precision level across the bed and shims the legs and slate until it reads true in every direction, then beds the seams and re-fits the cloth over a genuinely flat surface. This is slow, exacting work, and it is why re-levelling is built into a proper quote rather than being an afterthought. A table that was moved by a general crew and never re-levelled is the classic reason a home table suddenly plays crooked.

Because the re-level depends on a stable, even floor at the destination, mention the room and flooring when you enquire. A table going onto an uneven or soft floor may need extra shimming, and the crew can allow for it in the quote rather than discovering it on the day.

What it costs and how to get matched

A local Adelaide pool table dismantle, move and re-level typically runs around $300 to $700. Table size and slate configuration set the base (a 1-piece slate is a heavier, more awkward lift than a 3-piece), and access is the multiplier: stairs, narrow doorways and long carries all add crew and time, just as they do for a piano. Whether re-clothing is included also moves the number, so confirm it in each quote.

Getting matched is simple. Tell us the table size, both addresses and the access at each end once, and that enquiry goes to vetted pool table specialists who quote against it. You compare on price, availability and reviews, confirm the transit insurance cover, and deal directly with the crew you choose. Comparing costs nothing and there is no obligation.

  • Dismantle, move and re-level: indicative $300 to $700 locally.
  • Slate type: a 1-piece bed is a bigger job than a 3-piece.
  • Access: stairs and narrow doorways add crew and time.
  • Re-clothing may be extra: confirm whether it is included in each quote.

Frequently asked questions

A dismantle, move and re-level typically runs around $300 to $700 locally, depending on slate type, access and whether re-clothing is included. Get a pool table quote for a real figure.

Not safely if it has a slate bed. Slate is heavy and brittle and must be unbolted and carried flat, and the table must be re-levelled afterwards or it plays crooked. It is a genuine 3-stage specialist job.

Once reassembled, the slate has to be brought perfectly flat and level, because even a millimetre of fall makes balls drift. Re-levelling with a precision level and shims is what gives a true playing surface, and it is the stage general crews skip.

The cloth is delicate and can stretch or mark once disturbed, so specialists either preserve it carefully or remove and re-stretch it at the new address for a true surface. Ask whether re-clothing is included or quoted separately.

Vetted crews carry transit insurance. Confirm the cover level in each quote and ask about the slate specifically, since that is the highest-value, most fragile component.

Free, no obligation

Get 3 free removal quotes

Tell us about your move and we will match you with vetted, insured Adelaide crews. It takes about a minute, and there is no obligation.

  • Vetted local crews
  • Fully insured moves
  • Transparent quotes
  • No obligation
  1. 1

    Tell us about your move

    Move type, where from, where to, and the size.

  2. 2

    We match you with vetted crews

    Local, interstate and specialty movers, all insured.

  3. 3

    Compare quotes and book with confidence

    Choose on price and fit, with no pressure.

Get 3 free removal quotes